TORDIS II.2 PTB tent / 2,7 kg
The improved version of the well-known TORDIS tent. This is a lightweight, 2-men tent with two vestibules.
Tents
Dolina Izery, Góry Izerskie, Polska fot. Alexandra Wierzbowska
Dolina Izery, Góry Izerskie, Polska fot. Alexandra Wierzbowska
Klify Dilijan, Armenia fot. Alexandra Wierzbowska Wyprawa routsetterska "Project Armenia"
Main features:
- tent with much room, suitable for 2 persons
- designed to be used during mountain hiking, cycling, bivouacs and kayaking – suitable for almost any season of the year
- 2 independent entrances – 2 vestibules
- the tent can be safely pitchedin the rain, first pitching flysheet (frame tunnels are located outside the flysheet)
- in order to reduce the weight, the inner tent has been reduced – currently the size is 120 x 205 cm (previously the size was 130 x 215 cm)
- in addition, up to 2/3 of the inner tentis made of fabric (Poliripstop); the rest is made of mesh (Polyester Mesh)
- thanks to DCS technology, it has a lot of space in the inner tent, with this space in the tent, 3-4 persons can be present in the 2-man tent in a sitting position
- inside the inner tent, there are practical pockets and holes to hang for examplea headlamp, clothes-line
- in the tent, materials with enhanced performance in terms of endurance and duralumin frame were used
- all flysheet seams are laminated
- the tent is pitched very smoothly and quickly
- due to the tent construction, just the flysheet can be pitched
- all guy ropes in a new colour; with that colour they may be spotted more easily
- separate covers for the tent, frame and pegs included in the kit
Specifications:
- weight: 2700 g (including pegs 150 g, frame 650 g)
- dimension s of the inner tent (L x W x H): 205 x 120 x 105 cm
- dimensions when folded (length x diameter): 50 x 16 cm
- height of the inner tent: 105 cm
- suitable for: 2 men
- two 205 x 65 cm vestibules
- entrances: 2
- flysheet material: Poliester Ripstop PU (5000 H2O)
- inner tent material: PoliRipstop/PoliesterMesch
- footprint: nylon PU
- frame: external
- frame material: duralumin 8,5 mm
- pegs: duralumin
Double Comfort Space
- Double Comfort Space (DCS) a special tent frame profiling system. With this system, nearly vertical side walls effect was obtained. With this effect in the tent, 3-4 persons can be present in the 2-man tent in a sitting position without the risk of touching the inner tent material with their heads. The measurements we conducted showed that in this tent, the ‘usable’ surface is over 3.5 times higher than in the standard igloo*. The risk of touching the walls of the tent by tall individuals in the sleeping bag is also as low as possible with this system. The tent is equipped with the ventilation system.
During the Fair Sport-Lato in Kielce, Poland, the Tordis tent was awarded in technically innovative products category.
Description
The improved version of the well-known TORDIS tent. This is a lightweight, 2-men tent with two vestibules. The external frame applied here allows to pitch the flysheet and the inner tent at the same time, so that the inner tent will remain dry even in the rain.
Parameters
Weight [g]:
2700
Weight range [kg]:
ultralight up to 2.8
Number of entrances:
2
Number of persons:
2
Footprint material:
nylon PU
Type:
igloo
Flysheet material:
Polyester Ripstop PU
Flysheet water resistance [mm H₂O]:
5.000
Inner tent material:
PoliRipstop
Footprint water resistance [mm H₂O]:
6000
Inner tent dimensions [cm]:
205 x 120
Height of inner tent [cm]:
105
Vestibule dimensions [cm]:
205 x 65
Pack size:
50 x 16
Number of vestibules:
2
Footprint in the vestibule:
no
Frame:
external
Frame material:
duralumin [ALU GNA]
Daimeter of frame [mm]:
8.5
Stakes:
duralumin [URD ALU]
